ABB AF26-30-11-11

ABB AF26-30-11-11 AF26 CONTACTORS ARE USED FOR CONTROLLING POWER CIRCUITS UP TO 690 V AC AND 220 V DC. THEY ARE MAINLY USED FOR CONTROLLING 3-PHASE MOTORS, NON-INDUCTIVE OR SLIGHTLY INDUCTIVE LOADS. AF, CONTACTORS INCLUDE AN ELECTRONIC COIL INTERFACE ACCEPTING A WIDE CONTROL VOLTAGE UC MIN. , UC MAX. ONLY FOUR COILS COVER CONTROL VOLTAGES BETWEEN 24...500 V 50/60 HZ OR 20...500 V DC. AF CONTACTORS CAN MANAGE LARGE CONTROL VOLTAGE VARIATIONS. ONE COIL CAN BE USED FOR DIFFERENT CONTROL VOLTAGES USED WORLDWIDE WITHOUT ANY COIL CHANGE. AF CONTACTORS HAVE BUILT-IN SURGE PROTECTION AND DO NOT REQUIRE ADDITIONAL SURGE SUPPRESSORS. THE AF, SERIES 2-STACK 3-POLE CONTACTORS ARE OF THE BLOCK TYPE DESIGN. - MAIN POLES AND AUXILIARY CONTACT BLOCKS: 3 MAIN POLES WITH A NON-REMOVABLE FRONT-MOUNTED 1 N.O. + 1 N.C. AUXILIARY CONTACT BLOCK, SIDE-MOUNTED ADD-ON AUXILIARY CONTACT BLOCKS (MECHANICALLY-LINKED AUXILIARY CONTACTS COMPLIANT WITH ANNEX L OF IEC 60947-5-1 INCLUDING THE "MECHANICALLY LINKED" SYMBOL ON THE CONTACTOR SIDE. N.C. MIRROR CONTACTS COMPLIANT WITH ANNEX F OF IEC 60947-4-1) - CONTROL CIRCUIT: AC OR DC OPERATED - ACCESSORIES: A WIDE RANGE OF ACCESSORIES IS AVAILABLE. NOTE: 2-STACK CONTACTORS AVAILABLE IN SOME COUNTRIES: PLEASE CONSULT YOUR ABB REPRESENTATIVE. AF..-30-..-11 NOT SUITABLE FOR A DIRECT CONTROL BY PLC-OUTPUT.